Jacob Hall – Clone

 

12 December to 26 January 2024 | Case Studies

From digital to physical, plastic to clay, 3D printed models have been translated into ceramics through slip casting. The physical pieces shown were modelled digitally into a printable mesh. This mesh sets the boundaries and informs the printability of any given model and in the case of mould making whether a cast can be obtained. 

Once printed, the Plastic PLA models are cast in two halves with plaster. When set and de-moulded, liquid clay is poured through an opening, filing the negative space left by the plastic model. The absorbent nature of plaster allows for water within the clay slip to be separated from the clay into the mould walls. This leaves behind a thin smooth layer of clay. When dry, these thin clay cast can be fired and glazed, shrinking at each stage during these processes. The plaster moulds can be recast with slip generating multiples cast from the initial plastic model.

Materials Lab case study poster for Jacob Hall’s ‘done’, running from 12 December 2023 to 26 January 2024. The poster explains the process of translating 3D-printed models into slip-cast ceramics and shows three rendered vessel forms.
uos-wsa-logo
Photographs credits: Dave Gibbons and Xinyue Li. Email us for specific credits and captions for external use.