Jacob Hall – Clone
From digital to physical, plastic to clay, 3D printed models have been translated into ceramics through slip casting. The physical pieces shown were modelled digitally into a printable mesh. This mesh sets the boundaries and informs the printability of any given model and in the case of mould making whether a cast can be obtained.
Once printed, the Plastic PLA models are cast in two halves with plaster. When set and de-moulded, liquid clay is poured through an opening, filing the negative space left by the plastic model. The absorbent nature of plaster allows for water within the clay slip to be separated from the clay into the mould walls. This leaves behind a thin smooth layer of clay. When dry, these thin clay cast can be fired and glazed, shrinking at each stage during these processes. The plaster moulds can be recast with slip generating multiples cast from the initial plastic model.
